Hall’s Flooring Epoxy – Solvent Based Twin Pack Floor Coating
Hall’s Flooring Epoxy is a high-performance, solvent-based twin-pack epoxy enamel designed to provide a hard, durable, and chemical-resistant finish for floors and metal surfaces. Formulated with a pigmented epoxy resin base and a polyamide curing agent, this coating delivers exceptional adhesion, gloss retention, and long-term protection in demanding environments.
Ideal for industrial, commercial, and workshop floors, it offers excellent resistance to alkalis, bleaches, dilute acids, and solvents, making it suitable for areas exposed to chemical spillage or heavy traffic.
Key Features & Benefits:
-
High gloss, scratch-resistant finish
-
Excellent resistance to chemicals and solvents
-
Durable, hard-wearing coating for concrete and metal surfaces
-
Withstands temperatures up to 150°C
-
Excellent adhesion and coverage (7–9 m²/L)
-
Long pot life (up to 8 hours) for easy application
Recommended Uses:
-
Concrete floors in warehouses, factories, and workshops
-
Metal surfaces exposed to chemical or mechanical stress
-
Interior flooring and protective coatings for machinery or equipment
Application Instructions:
-
Surface Prep: Ensure surfaces are clean, dry, and free of grease, dust, or old coatings.
-
New concrete: Etch with 1:1 hydrochloric acid and rinse thoroughly.
-
Old or coated floors: Remove contaminants, sand, and patch repair before coating.
-
Mixing Ratio: 4 parts epoxy base to 1 part curing agent. Stir well and allow a 30-minute induction time.
-
Application: Apply using brush, roller, or spray. Thin with 10–20% Hall’s Thinners if needed.
-
Drying Time @25°C:
-
Surface dry: 2–4 hrs
-
Hard dry: 16–24 hrs
-
Recoat: 12–16 hrs
-
Recommended Film Thickness: 75–80 µm wet | 35–45 µm dry
Technical Data:
-
Finish: Gloss
-
Volume Solids: 44–46%
-
Density: 1.10–1.30 kg/L
-
Viscosity: 55–60 KU
-
Packaging: 1L & 5L kits
Storage: Store in a cool, dry area away from direct sunlight and frost. Keep sealed and upright during transport.
Data Sheets:
